Bentonite Products Springfield MA
PUREGOLD MEDIUM CHIPS
PURE GOLD MED. CHIPS are natural sodium bentonite screened to 1/4 inch (0.64 cm) to 3/8 inch (0.95 cm) in size. Sealing shallow boreholes and seismic shot holes; decommissioning wells; providing an interface between gravel pack and bentonite or cement grout. NSF/ANSI/CAN Standard 60 Certified.
C/S GRANULAR
C/S GRANULAR is a granular bentonite product composed of polymer-free, dried bentonite in various mesh sizes. May be used as casing seal, hole abandonment material, and for sealing earthen structures. NSF/ANSI/CAN Standard 60 Certified.
SUPER GEL-X
SUPER GEL-X is an easy mixing, high viscosity 200 bbl yield freshwater drilling fluid produced from the highest grade Wyoming sodium bentonite. May be used for all types of freshwater mud rotary drilling. NSF/ANSI/CAN Standard 60 Certified.
CETCO 1/4" TABLETS
CETCO TABLETS are designed for use in the groundwater monitoring industry to form a chemically resilient, low-permeability, flexible seal. CETCO TABLETS isolate screened intervals of monitoring wells and provide an excellent seal for abandoned boreholes. 1/4” (0.63 cm) CETCO TABLETS are ideal for tight annular spaces. NSF/ANSI/CAN Standard 60 Certified.
VERSAFOAM PLUS
VERSAFOAM PLUS is an ultra high-yielding, biodegradable, liquid foaming agent for use in fresh and saltwater air rotary drilling. Used in dry air rotary drilling or mixed with water for foam drilling. NSF/ANSI/CAN Standard 60 Certified.
SHORE PAC
SHORE PAC is an easy mixing, water soluble, polymer supplied as a granular powder. SHORE PAC is designed for preparation of viscous earth-reinforcing fluids or slurries for a variety of drilling, trenching, and walling applications in the geo-construction industry. SHORE PAC is ideal for slurry trenching, diaphragm walls, drilled shafts, bored piles, and tunneling. NSF/ANSI/CAN Standard 60 Certified.
GROUNDING GROUT
GROUNDING GROUT is a high-solids, single-component, bentonite grout. It is specially formulated to provide a conductive seal around grounding rods. When used to seal drilled boreholes in which vertical grounding rods are placed, GROUNDING GROUT increases the grounding system’s conductivity by lowering the resistivity from 300 ohms/meter with normal soil to 0.76 ohms/meter. GROUNDING GROUT adheres to the entire surface of the grounding rod, providing the smallest surface area and, consequently, offering the greatest effective resistance area. This helps to stabilize the ground resistance despite seasonal changes in temperature and soil moisture content.
CETCO GROUT
CETCO GROUT is a 20% solids, polymer-free, single-component, easy-to-use sodium bentonite grout available in powdered form. CETCO GROUT allows placement in a low viscosity state. CETCO GROUT is designed for grouting waterwells and monitoring wells and for decommissioning abandoned wells and boreholes. It forms a low-permeability, flexible seal. NSF/ANSI/CAN Standard 60 Certified.
SODA ASH
SODA ASH is the common name for sodium carbonate, which separates calcium into sodium and carbonate ions in solution. SODA ASH is used to raise the pH of make-up water for bentonite and polymer drilling fluids by precipitating soluble calcium. Using SODA ASH will increase the performance of bentonite and polymer drilling fluids. NSF/ANSI/CAN Standard 60 Certified.